Welding Instruction |
||||||||||||||||||||||||||||
( 1 ) Clean up the contaminations on the steel. ( 4 ) Please refer to Appendix A. |
||||||||||||||||||||||||||||
Typical Wire Composition of Weld Metal (wt %) |
||||||||||||||||||||||||||||
C |
Si |
Mn |
P |
S |
Cr |
Mo |
||||||||||||||||||||||
0.10 |
0.60 |
1.10 |
0.012 |
0.015 |
1.15 |
0.55 |
||||||||||||||||||||||
Typical Mechanical Properties of Weld Metal (PWHT:850°Cx2Hr) |
||||||||||||||||||||||||||||
Tensile Strength N/mm2(kgf/mm2) |
Yield Strength N/mm2(kgf/mm2) |
Elongation % |
||||||||||||||||||||||||||
582 (59.4) |
469 (47.1) |
24 |
||||||||||||||||||||||||||
Size and Suggested Operating Range (AC or DC+) |
||||||||||||||||||||||||||||
Diameter (mm) Parameters |
0.8 |
1.0 |
1.2 |
|||||||||||||||||||||||||
Short-Circuit Transfer |
A |
50~90 |
80~150 |
110~180 |
||||||||||||||||||||||||
V |
16~18 |
17~20 |
18~22 |
|||||||||||||||||||||||||
Spray Transfer |
A |
120~160 |
180~230 |
240~230 |
||||||||||||||||||||||||
V |
22~26 |
24~30 |
26~33 |