Applications and Features |
|||||||||||||||||
( 1 ) Weld metal is austenitic structure with 20%Cr-9%Ni-6%Mn. ( 2 ) High silicon level for increased puddle fluidity and toe wetting. ( 3 ) 6% Manganese (Mn) increases resistance to hot cracking. ( 4 ) Suitable for welding work hardening manganese steel and armor plate. ( 5 ) Designed for joining dissimilar stainless steel. |
|||||||||||||||||
Welding Position |
|||||||||||||||||
|
|||||||||||||||||
Welding Instruction |
|||||||||||||||||
( 1 ) Use Ar+1~2%O2 for spray transfer and Ar+1~2%CO2 for short-circuit transfer. ( 2 ) For other instructions, please refer to Appendix B and F. |
|||||||||||||||||
Typical Chemical Composition of Weld Metal (wt%) |
|||||||||||||||||
C |
Si |
Mn |
P |
S |
Cr |
Ni |
|||||||||||
0.06 |
0.82 |
6.10 |
0.018 |
0.012 |
19.22 |
8.10 |
|||||||||||
Typical Mechanical Properties of Weld Metal |
|||||||||||||||||
Tensile Strength N/mm2 |
Yield Strength N/mm2 |
Elongation % |
|||||||||||||||
610 |
460 |
41 |
|||||||||||||||
Size and Suggested Operating Range ( |
|||||||||||||||||
Diameter (mm) |
0.8 |
0.9 |
1.0 |
1.2 |
1.4 |
1.6 |
|||||||||||
Ar+1~2%CO2 |
Current (A) |
40~120 |
60~140 |
80~160 |
100~210 |
- |
- |
||||||||||
Voltage (V) |
15~20 |
15~21 |
16~22 |
17~22 |
- |
- |
|||||||||||
Ar+1~2%O2 |
Current (A) |
160~210 |
170~260 |
180~280 |
200~300 |
210~320 |
220~330 |
||||||||||
Voltage (V) |
24~28 |
24~30 |
24~30 |
24~30 |
24~32 |
24~32 |