Welding Instruction |
||||||||||
(1) Dry the electrodes at 100-200°C for 30-60 minutes before use. (2) Preheat temperature should be ≥ 250°C and PWHT should be 600°C. (3) Weld beads should be put down in grid shape to prevent the surfacing layers from spalling. |
||||||||||
Typical Chemical Composition of Weld Metal (wt. %) |
||||||||||
C |
Si |
Mn |
Cr |
|||||||
3.600 |
4.20 |
1.20 |
22.00 |
|||||||
Typical Hardness of Weld Metal |
||||||||||
Hardness Condition |
Vicker’s hardness (HV) |
Rockwell’s hardness (HRC) |
Shore’s hardness (HS) |
|||||||
As-welded |
Interpass temp. ≤150°C |
1010 |
67 |
93 |
||||||
Size and Suggested Operating Range (AC or DC+) |
||||||||||
Diameter x Length(mm) |
3.2x350 |
4.0x350 |
5.0x350 |
|||||||
Amp |
90~140 |
140~190 |
190~250 |