Applications and Features |
|
|||||||||||||||||||
( 1 ) Weld metal is precipitation hardening martensitic structure with16.5%Cr-4.7%Ni-3.6%Cu-Nb. ( 2 ) Used in as welded condition or may be heat treated to obtain higher strength ( 3 ) Suitable for welding ASTM 564/630, SUS630 and 17-4PH plate. |
|
|||||||||||||||||||
Welding Position |
|
|||||||||||||||||||
|
|
|||||||||||||||||||
Welding Instruction |
|
|||||||||||||||||||
( 1 ) Use Ar+1~2%O2 for spray transfer and Ar+1~2%CO2 for short-circuit transfer. ( 2 ) For other instructions, please refer to Appendix B and F. |
|
|||||||||||||||||||
Typical Chemical Composition of Weld Metal (wt%) |
|
|||||||||||||||||||
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Nb |
Cu |
||||||||||||
0.03 |
0.37 |
0.52 |
0.010 |
0.007 |
16.48 |
4.60 |
0.20 |
3.23 |
||||||||||||
Typical Mechanical Properties of Weld Metal |
|
|||||||||||||||||||
Tensile Strength N/mm2 |
Yield Strength N/mm2 |
Elongation % |
||||||||||||||||||
990 |
850 |
10 |
||||||||||||||||||
Size and Suggested Operating Range ( |
|
|||||||||||||||||||
Diameter (mm) |
0.8 |
0.9 |
1.0 |
1.2 |
1.4 |
1.6 |
||||||||||||||
Ar+1~2%CO2 |
Current (A) |
40~120 |
60~140 |
80~160 |
100~210 |
- |
- |
|||||||||||||
Voltage (V) |
15~20 |
15~21 |
16~22 |
17~22 |
- |
- |
||||||||||||||
Ar+1~2%O2 |
Current (A) |
160~210 |
170~260 |
180~280 |
200~300 |
210~320 |
220~330 |
|||||||||||||
Voltage (V) |
24~28 |
24~30 |
24~30 |
24~30 |
24~32 |
24~32 |