KNi-96

Type of coating: Low hydrogen
KNi-96 is designed for AC welding with good weldability.

KNi-96 is designed for AC welding with good weldability.
It provides good corrosion resistance.
It is ideal for welding Nickel 200, 201, nickel, nickel-based and nickel forged/cast working piece.
It is ideal for the machinery of pressure vessels, fabrications, chemical and food stuff industry.

Clean the surface of the base metal before welding.
It is difficult for welding in V & O-H positions, so F welding is recommended.
Baking temperature should be between 350~400°C during 30~60 minutes before welding. No PWHT is required for base metal.
To avoid weave arc, make a short arc in low current.
To avoid porosity, use the back step method for welding. (Please refer to Appendix A)

Ideal for the machinery of pressure vessels, fabrications, chemical and food stuff industry.

C	Si	Mn	P	S	Fe	Cu	Ti
0.06	0.90	0.60	0.007	0.009	0.40	0.10	2.00

Tensile Strength N/mm²	Yield Strength N/mm²	Elongation %	Charpy V-Notch ℃	Charpy V-Notch J
520	305	42	20	120

JISZ3323_TCTW08007

廣泰金屬工業股份有限公司

No.20, Gongye Rd., Erzhen, Guantian Dist.
Tainan City 72042, Taiwan
TEL：886-6-6987615 FAX：886-6-6987315