KNi-60-3

Type of coating: Low hydrogen
KNi-60-3 is designed for welding in DC with good weldability

KNi-60-3 is designed for welding in DC with good weldability.
It provides good heat and corrosion resistance to high temperature at 540°C.
It is ideal for welding chemical procedure equipment, such as Incon 62, high nickel alloy and dissimilar steel.

Clean the surface of the base metal before welding.
It is difficult for welding in V & O-H positions, so F welding is recommended.
Baking temperature should be between 350~400°C during 30~60 minutes before welding. No PWHT is required for base metal.
To avoid weave arc, make a short arc in low current.
To avoid porosity, use the back step method for welding. (Please refer to Appendix A)

It is ideal for welding chemical procedure equipment, such as Incon 62, high nickel alloy and dissimilar steel.

C	Si	Mn	P	S	Fe	Cr	Mo	Nb	Ni
0.07	0.32	0.78	0.009	0.008	5.40	20.80	8.90	3.52	59.60

Tensile Strength N/mm²	Yield Strength N/mm²	Elongation %	Charpy V-Notch ℃	Charpy V-Notch J
770	510	39	-196	60

JISZ3323_TCTW08007

廣泰金屬工業股份有限公司

No.20, Gongye Rd., Erzhen, Guantian Dist.
Tainan City 72042, Taiwan
TEL：886-6-6987615 FAX：886-6-6987315