KCu-70

For butt or over-lap welding in Cu-Ni alloy (70%Cu-30%Ni, 80%Cu-20%Ni)

For direct current welding electrodes, featuring excellent weldability and workability.
Exhibits good resistance to seawater corrosion.
Suitable for welding copper-nickel alloys, such as 70%Cu–30%Ni, 80%Cu–20%Ni, as well as for cladding and joining copper-nickel alloys.
Applicable to the welding of seawater desalination equipment, seawater treatment systems, evaporators, and condensers.

For drying conditions, please refer to the re-drying instructions for welding electrodes and submerged arc welding flux.
For other information, please refer to the welding precautions for copper and copper-base alloys.

Applicable to the welding of seawater desalination equipment, seawater treatment systems, evaporators, and condensers.

C	Si	Mn	P	S	Ni	Ti	Pb	Fe	Cu
0.03	0.05	0.86	0.003	0.001	31.33	0.41	0.01	0.67	64.71

Tensile Strength N/mm²	Yield Strength N/mm²	Elongation %	Charpy V-Notch ℃	Charpy V-Notch J
386	268	30	–	–

JISZ3323_TCTW08007

廣泰金屬工業股份有限公司

No.20, Gongye Rd., Erzhen, Guantian Dist.
Tainan City 72042, Taiwan
TEL：886-6-6987615 FAX：886-6-6987315